GSM 12A+ is a control unit intended for 12V. With 2 inbuilt relays, 2 ports for temperature sensors, 2 ports for alarm detectors and low power consumption it is a very useful product for locations with no mains electricity. A bestseller for solar cell and 12V.
GSM Alarm Controller III er flaggskipet innen styringsenheter beregnet for montasje i sikringskapet. Med 3 innebygde releer, 3 innganger for temperaturfølere, 4 innganger for kablet alarm og innebygd radio er den et sikkert valg for større installasjoner.
Sikom EGR-1 is a slave relay for mounting on DIN rail in fuse box. EGR-1 has 1 16A / 3600W relay which can be controlled remotely. It also has 1 port for temperature sensor which means that the relay can be used as a thermostat and change between energy saving and comfort temperature. With 2 ports for alarm in addition this is a very versatile product.
Sikom Wired Fire Detector is an optic smoke detector designed for cabling. Runs on 12V from Central Unit and should be connected with at least 3 conductors. The smoke detector will of course also emit a local warning signal in addition to sending a warning to you.
Sikom Wired Magnet Detector makes it easy to monitor exposed doors and windows. When the magnetic field between the two parts is interrupted the alarm is activated. You need a dual conductor from Central Unit to the magnetic connector.
Sikom Wired PIR Detector is designed for cabling. Runs on 12V from Central Unit and should be connected with at least 3 conductors. The motion sensor can sound a local alarm when using ECO Siren Node and can of course also send you a warning.
Sikom Wired Water Detector is a water detector designed for cabling. Runs on 12V from Central Unit and should be connected with at least 3 conductors. The water detector warns if there is contact between the poles on the bottom of the detector.