Do it yourself, DIY
Our DIY products are easy to get started with, and most of them can also be expanded with auxiliary equipment which require installation.
ECO Glamox Plug is connected directly to the heater and provides the option to centrally and remotely control heaters via our apps.
You decide the energy saving and the comfort temperature for the heater. Minimum energy saving temperature is 5 degrees Celsius and maximum comfort temperature is 40 degrees Celsius.
Our apps make it easy to switch between energy saving and comfort temperature or to set up a Energy saving.
ECO Glamox Plug transmits the temperature measured on the back of the heater so that you can see the temperature in our app.
ECO Glamox Plug makes it easier than ever to control heaters from your mobile phone.
Compatible with Glamox heaters of type 3001.
ECO BEHA Plug is particularly suitable for a house or cottage where you want to be able to turn the heater off completely when you are not there (energy saving function "OFF").
ECO BEHA Plug is connected directly to the heater and gives you the option to control the heater centrally or remotely between either:
1) Comfort temperature, the temperature is set on the thermostat wheel on the heater
2) Energy saving function. There are three energy saving settings: night temperature, frost function or off (heather completely turned off).
The default setting is night temperature. You can choose energy saving setting in the app.
Explanation of the three energy saving features:
Night temperature - the temperature is lowered 4-5 below the temperature that the thermostat wheel on the heater is set to.
Frost function - the temperature is lowered to around 5-7 degrees.
Off - the heater is turned off completely and will not turn on until the systemet is set to comfort temperature again.
The temperature in the room is not accesible via ECO BEHA Plug. For temperature reading, we recommend a product such as ECO Temperature sensor 10-47K or Wireless Temperature Sensor.
All control is based on the temperature wheel on the heater. ECO BEHA Plug is compatible with all BEHA heaters of type P and L produced from August 2005.
Runs either on mains electricity or 9V battery.
The smoke detector will of course have a local alarm as well as sending a warning to you.
If one detector is set off all other detectors will also be activated.
The main advantage with a cabled temperature sensor is that it never runs out of power. ECO Temperature sensor 10-47K is equally suitable for open and hidden electrical installations. It can be installed straight onto the wall or directly on a wall box for a hidded installation.
ECO Temperature sensor 10-47K has two temperature sensors of NTC type, one at 10 kilo ohm and one at 47 kilo ohm so that it is compatible with both old and new equipment.
ECO Temperature sensor 10-47K has a classic sleek design (RS16).