The relays on GSM 12A+ can be used as switches (ON/OFF), one of the relays, together with the temperature sensor, can be used as a thermostat switching between e.g. energy saving and comfort temperature. In this way you can maintain a basic heat in the cabin when you are not there. You set the temperatures yourself. It also has pulse and timer control of the relays.
Sikom GSM 12A+ can control many 12V cabin heaters on the market. Examples of heaters that can use GSM 12A+ for remote control: Wallas, Cami, Inverter and Zibro
With 2 ports for temperature sensors and 2 ports for alarm detectors the expansion possibilities are limited, but we have the following auxiliary equipment for GSM 12A+:
Sikom GSM 12A+ can be controlled locally with switches for the relays.
GSM 12A+ communicates via the GSM network in the form of SMS messages. In order to control the device remotely it must have an activated SIM card with an inactivated PIN code. GSM 12A+ is delivered with en M2M SIM card from Telenor, but you can use any other SIM card if you prefer.
GSM 12A+ is easily controlled with SMS commands.
Node Temperature Sensor, 8 m
Suitable auxilliary equipment for GSM 12A+
Sikom Wired Fire Detector is an optic smoke detector designed for cabling. Runs on 12V from Central Unit
and should be connected with at least 3 conductors. The smoke detector will of course also emit a local warning signal in addition to sending a warning to you.
Sikom Wired Magnet Detector makes it easy to monitor exposed doors and windows. When the magnetic field between the two parts is interrupted the alarm is activated. You need a dual conductor from Central Unit
to the magnetic connector.
Sikom Wired PIR Detector is designed for cabling. Runs on 12V from Central Unit
and should be connected with at least 3 conductors. The motion sensor can sound a local alarm when using Eco Siren Node
and can of course also send you a warning.
Sikom Wired Water Detector is a water detector designed for cabling. Runs on 12V from Central Unit
and should be connected with at least 3 conductors. The water detector warns if there is contact between the poles on the bottom of the detector.
Temperature Sensor, 8 m is a temperature sensor with stripped cable ends ready for connection to connection block. Sensor and sensor cables should not be exposed to direct sunlight, the jacket around the cable is not UV resistant. The sensor can be shortened and lengthened.