GSM Eco-Comfort is a very versatile large capacity control unit. It can control up to 64 wireless devices and covers everything from wireless plugs for control of heaters, relays for installation in fuse boxes, wireless floor/room thermostats and a wide range of detectors.
Installation manual Product sheet
NOK 2990.00 Buy
Remote control of heatersThe easiest option for remote control of heaters is Eco Node, a wireless plug. The node is registered in the central unit so that the two units can communicate with each other. Place the node at the desired location, turn on the heaters and you can then control the heater. If you want temperature control for the node – switch between energy saving and comfort temperature – you also need a temperature sensor of the type Node temperature sensor 10 cm.
Remote control of heating cablesFor remote control of heating cables, in addition to GSM Eco-Comfort you need one or more of our wireless room thermostats, Eco Thermostat SI-3 10A or Eco Thermostat SI-3 16A. You can decide on a energy saving temperature and a comfort temperature between 5 and 40 degrees. The thermostat can use the included floor sensor or inbuilt room sensor. The room thermostat must be installed by an authorised electrician. The thermostat is registered in the central unit and can therefore also be controlled remotely.
Remote control of an entire heating circuitIf you need to control an entire circuit we recommend that you use relay EGR-1 or EGR-3 installed in the fuse box. Together with a cabled Temperature Sensor, 8 m from the fuse box and out to room the relay can be used as a thermostat, switching between energy saving and comfort temperature.
Suitable auxilliary equipment for GSM Eco-Comfort
It is designed for hidden installation and delivers two control signals to the thermostat: 230 VAC and 230 VAC via a rectifier diode. This makes the thermostat completely flexible.
Eco Thermostat Pill has been tested with:
Comforttemp 750 from VarmeComfort - Day (comfort), Night (energy saving) or frost protection.
Comforttemp 740 from VarmeComfort - Day (comfort), Night (energy saving) or Frost protection.
Multireg LCD2 from ThermoFloor - Day (comfort), Night (energy saving)
MTC2-1991-MH from MicroMatic - Day (comfort, Night (energy saving) or frost protection.
Eco Thermostat Pill communicates wirelessly with the central unit so it is very easy to install. We recommend a wall box with a depth of 57 mm together with Eco Thermostat Pill.
The thermostat can be remote controlled, with the option to change between normal, night mode and frost protection.
Please note that our thermostat products, such as Eco Thermostat SI-3 10Aand Eco Thermostat SI-3 16A has inbuilt remote control.
Runs either on mains electricity or 9V battery.
The smoke detector will of course have a local alarm as well as sending a warning to you.
If one detector is set off all other detectors will also be activated.