No longer in production erstattet av GSM Mini Plus
Sikom GSM Mini is our Plug & Play solution for simple control purposes. GSM Mini is used to remotely activate heating as well as controlling industrial appliances. The unit can control up to 8 wireless electrical outlets by radio, making it your simplest and most reliable option if you want to control appliances such as heaters.
Product sheet User manual
Expansion of GSM MiniGSM Mini is expandable. With Control by Radio this unit can be expanded with up to 9 wireless devices, such as Eco Node. This is a compact unit with inbuilt antenna for wireless control of auxiliary equipment. Consequently GSM Mini is most suitable for smaller houses and cabins, without many floors and dividing walls.
Eco Node is the perfect choice if you only want to control a few heaters. If you want to temperature control a Eco Node, i.e. switch between energy saving and comfort temperature, you also need a temperature sensor of the type Node Temperature Sensor, 10 cm. You can also take a reading of the temperature with the sensor.
Recommended auxiliary equipment for GSM Mini:
- Eco Node
- Node Temperature Sensor, 10 cm
- Wireless Fire Detector
- Wireless PIR detector
- Wireless Temperature Sensor
Remote control of GSM MiniSo that you as a customer are not bound to a certain control services provider, there are two options for remote control of the unit:
1) App control via MinHytte
2) Control by SMS via your own SIM card.
Get started in no timeWe have made it extremely easy to get started with GSM Mini. A GSM card from Sikom is pre-installed in GSM Mini
- Download the app MinHytte or SikomLiving to your mobile from App Store or Google Play.
- Enter the value code which is delivered with the product.
- Start controlling.
Important information about GSM MiniFor a compact size GSM Mini has an inbuilt GSM antenna. It works well in areas with a good GSM signal. If you don't have a good GSM-signal GSM Eco-Comfort gives more flexibility with external antenna connection and the option to use an outdoor antenna.
Suitable auxilliary equipment for GSM Mini
Eco Glamox Plug is connected directly to the heater and provides the option to centrally and remotely control heaters via our apps.
You decide the energy saving and the comfort temperature for the heater. Minimum energy saving temperature is 5 degrees Celsius and maximum comfort temperature is 40 degrees Celsius.
Our apps make it easy to switch between energy saving and comfort temperature or to set up a Energy saving.
Eco Glamox Plug transmits the temperature measured on the back of the heater so that you can see the temperature in our app.
Eco Glamox Plug makes it easier than ever to control heaters from your mobile phone.
Compatible with Glamox heaters of type 3001.
Eco BEHA Plug is particularly suitable for a house or cottage where you want to be able to turn the heater off completely when you are not there (energy saving function "OFF").
Eco BEHA Plug is connected directly to the heater and gives you the option to control the heater centrally or remotely between either:
1) Comfort temperature, the temperature is set on the thermostat wheel on the heater
2) Energy saving function. There are three energy saving settings: night temperature, frost function or off (heather completely turned off).
The default setting is night temperature. You can choose energy saving setting in the app.
Explanation of the three energy saving features:
Night temperature - the temperature is lowered 4-5 below the temperature that the thermostat wheel on the heater is set to.
Frost function - the temperature is lowered to around 5-7 degrees.
Off - the heater is turned off completely and will not turn on until the systemet is set to comfort temperature again.
The temperature in the room is not accesible via Eco BEHA Plug. For temperature reading, we recommend a product such as Eco Temperature sensor 10-47K or Wireless Temperature Sensor.
All control is based on the temperature wheel on the heater. Eco BEHA Plug is compatible with all BEHA heaters of type P and L produced from August 2005.
Eco Relay has 3 16 A / 3600 W potential free relays with associated port for cabled temperature sensors.
The relays can be used individually as on/off switches or thermostat. By connecting cabled temperature sensors it is possible to make a temperature reading and activate temperature monitoring to send alerts at low temperature.
You can also activate thermostat function individually on the relay with a connected temperature sensor and use them as thermostats - switch between energy saving and comfort temperature.
Eco Relay also has 3 ports for cabled alarm equipment, plus a siren relay which is activated if the central unit is activated by fire or break-in.
The relay module communicates wirelessly with the central unit, so it is very easy to install.
Eco Relay also has control buttons so that you can control each relay locally.
It is designed for hidden installation and delivers two control signals to the thermostat: 230 VAC and 230 VAC via a rectifier diode. This makes the thermostat completely flexible.
Eco Thermostat Pill has been tested with:
Comforttemp 750 from VarmeComfort - Day (comfort), Night (energy saving) or frost protection.
Comforttemp 740 from VarmeComfort - Day (comfort), Night (energy saving) or Frost protection.
Multireg LCD2 from ThermoFloor - Day (comfort), Night (energy saving)
MTC2-1991-MH from MicroMatic - Day (comfort, Night (energy saving) or frost protection.
Eco Thermostat Pill communicates wirelessly with the central unit so it is very easy to install. We recommend a wall box with a depth of 57 mm together with Eco Thermostat Pill.
The thermostat can be remote controlled, with the option to change between normal, night mode and frost protection.
Please note that our thermostat products, such as Eco Thermostat SI-3 10Aand Eco Thermostat SI-3 16A has inbuilt remote control.
Eco Wall Socket makes a neat and permanent installation easier without the use of wireless plugs such as ECO Node (el.nr: 64 311 24). The installation is simply much safer.
Eco Wall Socket is equally suitable for open and hidded installations. Max load 16A/3600W. Everything that is connected to Eco Wall Socket will be remote controlled so it is important not to connect electronic devices that you don't want to control remotely.
Eco Wall Socket can be used as a switch (on/off) or as a thermostat (energy saving/comfort).
To use Eco Wall Socket as a thermostat it needs to be connected to a temperature sensor. It is then possible to set an energy saving and a comfort temperature that you can switch between. It couldn't be easier.
Eco Wall Socket needs to be registered in the central unit through a specific process described in the user manual.
Runs either on mains electricity or 9V battery.
The smoke detector will of course have a local alarm as well as sending a warning to you.
If one detector is set off all other detectors will also be activated.