GSM12APlus is a control unit intended for 12V. With 2 inbuilt relays, 2 ports for temperature sensors, 2 ports for alarm detectors and low power consumption it is a very useful product for locations with no mains electricity. A bestseller for solar cell and 12V.
GSMAlarmControllerIII er flaggskipet innen styringsenheter beregnet for montasje i sikringskapet. Med 3 innebygde releer, 3 innganger for temperaturfølere, 4 innganger for kablet alarm og innebygd radio er den et sikkert valg for større installasjoner.
Sikom EGR1 is a slave relay for mounting on DIN rail in fuse box. EGR1 has 1 16A / 3600W relay which can be controlled remotely. It also has 1 port for temperature sensor which means that the relay can be used as a thermostat and change between energy saving and comfort temperature. With 2 ports for alarm in addition this is a very versatile product.
Sikom WiredFireDetector is an optic smoke detector designed for cabling. Runs on 12V from Unité centrale and should be connected with at least 3 conductors. The smoke detector will of course also emit a local warning signal in addition to sending a warning to you.
Sikom WiredMagnetDetector makes it easy to monitor exposed doors and windows. When the magnetic field between the two parts is interrupted the alarm is activated. You need a dual conductor from Unité centrale to the magnetic connector.
Sikom WiredPIRDetector is designed for cabling. Runs on 12V from Unité centrale and should be connected with at least 3 conductors. The motion sensor can sound a local alarm when using ECOSireneNode and can of course also send you a warning.
Sikom WiredWaterDetector is a water detector designed for cabling. Runs on 12V from Unité centrale and should be connected with at least 3 conductors. The water detector warns if there is contact between the poles on the bottom of the detector.