Relaissteuerung
Relay control means that Zentraleinheit or Node controls an electrical circuit directly via relay.
Beschreibung
When relay control is used Zentraleinheit is normally installed in the fuse box.
Relay control gives a professional and permanent installation with better stability and reliability. Please note that an Autorisierter Elektriker must install relay controlled products.
See also Funkkontrolle
Many products are equipped with both Funkkontrolle and Relaissteuerung
See also Kontrolle über GPRS and Steuerung per SMS for more information on sending control commands to the central unit from e.g. your GSM phone.
Relay control gives a professional and permanent installation with better stability and reliability. Please note that an Autorisierter Elektriker must install relay controlled products.
See also Funkkontrolle
Many products are equipped with both Funkkontrolle and Relaissteuerung
See also Kontrolle über GPRS and Steuerung per SMS for more information on sending control commands to the central unit from e.g. your GSM phone.
Verwandte Produkte
Zentraleinheit
GSMFixiPlus is our bestselling control unit for installation in fuse box. With 2 inbuilt 16A relays, 2 ports for temperature sensors, inbuilt battery for power failure warnings and 1 alarm port this unit is all you need for a wide range of installations.
GSMAlarmControllerIII er flaggskipet innen styringsenheter beregnet for montasje i sikringskapet. Med 3 innebygde releer, 3 innganger for temperaturfølere, 4 innganger for kablet alarm og innebygd radio er den et sikkert valg for større installasjoner.
Stromversorgung
ECO Dimplex Receiver lets you easily switch between an economy temperature (Eco) and a normal temperature (Comfort). Temperatures are adjustable. The minimum set temperature is 7 degrees C, the maximum set temperature is 30 degrees C.
ECOGlamoxPlug is a plug-in module for heaters in the 3001 series from Glamox Heating.
ECOGlamoxPlug is connected directly to the heater and provides the option to centrally and remotely control heaters via our apps.
You decide the energy saving and the comfort temperature for the heater. Minimum energy saving temperature is 5 degrees Celsius and maximum comfort temperature is 40 degrees Celsius.
Our apps make it easy to switch between energy saving and comfort temperature or to set up a Wochenschaltuhr.
ECOGlamoxPlug transmits the temperature measured on the back of the heater so that you can see the temperature in our app.
ECOGlamoxPlug makes it easier than ever to control heaters from your mobile phone.
Compatible with Glamox heaters of type 3001.
ECOGlamoxPlug is connected directly to the heater and provides the option to centrally and remotely control heaters via our apps.
You decide the energy saving and the comfort temperature for the heater. Minimum energy saving temperature is 5 degrees Celsius and maximum comfort temperature is 40 degrees Celsius.
Our apps make it easy to switch between energy saving and comfort temperature or to set up a Wochenschaltuhr.
ECOGlamoxPlug transmits the temperature measured on the back of the heater so that you can see the temperature in our app.
ECOGlamoxPlug makes it easier than ever to control heaters from your mobile phone.
Compatible with Glamox heaters of type 3001.
Relé for innebygging i veggboks.
Bruker firkantet boks til CTM Lyng, festes til vegg (altså ikke skjult installasjon).
Foreslås av Terje at ventes med siden liten etterspørsel. Kan kanskje bestille 100 stk siden lite marked foreløpig.
Er altså ferdig for produksjon.
Bruker firkantet boks til CTM Lyng, festes til vegg (altså ikke skjult installasjon).
Foreslås av Terje at ventes med siden liten etterspørsel. Kan kanskje bestille 100 stk siden lite marked foreløpig.
Er altså ferdig for produksjon.
ECONodeWallSocket is a remote controlled plug with radio communication to and from our central units. Both outputs are controlled synchronously.
ECONodeWallSocket makes a neat and permanent installation easier without the use of wireless plugs such as ECO Node (el.nr: 64 311 24). The installation is simply much safer.
ECONodeWallSocket is equally suitable for open and hidded installations. Max load 16A/3600W. Everything that is connected to ECONodeWallSocket will be remote controlled so it is important not to connect electronic devices that you don't want to control remotely.
ECONodeWallSocket can be used as a switch (on/off) or as a thermostat (energy saving/comfort).
To use ECONodeWallSocket as a thermostat it needs to be connected to a temperature sensor. It is then possible to set an energy saving and a comfort temperature that you can switch between. It couldn't be easier.
ECONodeWallSocket needs to be registered in the central unit through a specific process described in the user manual.
ECONodeWallSocket makes a neat and permanent installation easier without the use of wireless plugs such as ECO Node (el.nr: 64 311 24). The installation is simply much safer.
ECONodeWallSocket is equally suitable for open and hidded installations. Max load 16A/3600W. Everything that is connected to ECONodeWallSocket will be remote controlled so it is important not to connect electronic devices that you don't want to control remotely.
ECONodeWallSocket can be used as a switch (on/off) or as a thermostat (energy saving/comfort).
To use ECONodeWallSocket as a thermostat it needs to be connected to a temperature sensor. It is then possible to set an energy saving and a comfort temperature that you can switch between. It couldn't be easier.
ECONodeWallSocket needs to be registered in the central unit through a specific process described in the user manual.
Sikom EGR1 is a slave relay for mounting on DIN rail in fuse box. EGR1 has 1 16A / 3600W relay which can be controlled remotely. It also has 1 port for temperature sensor which means that the relay can be used as a thermostat and change between energy saving and comfort temperature. With 2 ports for alarm in addition this is a very versatile product.
Sikom EGR1SireneNode is a slave relay for mounting on DIN rail in fuse box. EGR1SireneNode has 1 16A / 3600W relay which can be controlled remotely. It also has 1 port for temperature sensor which means that the relay can be used as a thermostat and change between energy saving and comfort temperature. With 2 ports for alarm in addition this is a very versatile product.
Sikom EGR3 is a slave relay for installation on DIN rail in fuse box. EGR3 has 3 16A / 3600W relays with associated ports for temperature sensors so that the relays can be used as thermostats.
GS33 is a slave relay with three potential free relays for installation together with the products GSMAlarmControllerIII or GSMFixiPlus. Makes it possible to extend with 3 circuits @ 16 ampere.
Digital thermostat or effect regulator with room, floor and limit sensor.
ComfortTemp750 is an electronic thermostat or effect regulator with inbuilt sensor, floor sensor and max / min limit in the floor sensor (NTC). The display has icons for easy operation.
ComfortTemp750 is an electronic thermostat or effect regulator with inbuilt sensor, floor sensor and max / min limit in the floor sensor (NTC). The display has icons for easy operation.
MicrotempMTC2 is a digital thermostat for installation in standard wall box or directly on the wall with surface mounting box of type MTC-VH. MicrotempMTC2 is equipped with dual pole switch and has capacity for both energy saving and frost protection. The thermostats can control up to 3600W (16A) and have an LED which is lit when the heating is on. For larger loads MTC2 can control contactors.