Sikom Funkprotokoll 1 (älter)
Old Sikom radio protocol (connx version 1). Supported by central units such as A-Comfort/HyttaMi-komfort.
Please note that a lot of new auxiliary equipment supports both old and new Sikom radio protocol(Sikom Funkprotokoll 1 (älter) and Sikom Funkprotokoll 2 (neu))
However, newer central units such as GSMECOComfort and GSMECOStarter do not support old auxiliary equipment.
Please note that a lot of new auxiliary equipment supports both old and new Sikom radio protocol(Sikom Funkprotokoll 1 (älter) and Sikom Funkprotokoll 2 (neu))
However, newer central units such as GSMECOComfort and GSMECOStarter do not support old auxiliary equipment.
Verwandte Produkte
Zentraleinheit
GSMAlarmControllerIII er flaggskipet innen styringsenheter beregnet for montasje i sikringskapet. Med 3 innebygde releer, 3 innganger for temperaturfølere, 4 innganger for kablet alarm og innebygd radio er den et sikkert valg for større installasjoner.
Stromversorgung
ECONode is a Plug&Play wireless plug for use with several of our central units. It has an inbuilt 16A / 3600W relay and is suitable for remote control or heaters and other electronic products which are plugged into a wall socket.
ECORelay is installed in the fuse box and is a development of our earlier relays (EGR1 and EGR3)
ECORelay has 3 16 A / 3600 W potential free relays with associated port for cabled temperature sensors.
The relays can be used individually as on/off switches or thermostat. By connecting cabled temperature sensors it is possible to make a temperature reading and activate temperature monitoring to send alerts at low temperature.
You can also activate thermostat function individually on the relay with a connected temperature sensor and use them as thermostats - switch between energy saving and comfort temperature.
ECORelay also has 3 ports for cabled alarm equipment, plus a siren relay which is activated if the central unit is activated by fire or break-in.
The relay module communicates wirelessly with the central unit, so it is very easy to install.
ECORelay also has control buttons so that you can control each relay locally.
ECORelay has 3 16 A / 3600 W potential free relays with associated port for cabled temperature sensors.
The relays can be used individually as on/off switches or thermostat. By connecting cabled temperature sensors it is possible to make a temperature reading and activate temperature monitoring to send alerts at low temperature.
You can also activate thermostat function individually on the relay with a connected temperature sensor and use them as thermostats - switch between energy saving and comfort temperature.
ECORelay also has 3 ports for cabled alarm equipment, plus a siren relay which is activated if the central unit is activated by fire or break-in.
The relay module communicates wirelessly with the central unit, so it is very easy to install.
ECORelay also has control buttons so that you can control each relay locally.
Together with Glen Dimplex Nordic we have developed receiver plugs for control of Siemens Unique and Classic, Dimplex Topaz and potentially Clima Extend by using Sikom central units with wireless radio control.
ECOSireneNode is a Plug&Play wireless plug for use with several of our central units. It has an inbuilt 16A / 3600W relay and is suitable for remote control or heaters and other electronic products which are plugged into a wall socket.
Alarm
Sikom WirelessFireDetector is an optic smoke detector with wireless connection to Zentraleinheit. This makes it very easy to install, because no cables are required.
Runs either on mains electricity or 9V battery.
The smoke detector will of course have a local alarm as well as sending a warning to you.
If one detector is set off all other detectors will also be activated.
Runs either on mains electricity or 9V battery.
The smoke detector will of course have a local alarm as well as sending a warning to you.
If one detector is set off all other detectors will also be activated.