GSMECOController is a very versatile control unit for smart houses and cabins.

This large capacity unit can control up to 64 wireless devices.

Otherwise same functionality as GSMECOComfort but with Modbus and RS485 in addition and intended for installation in the fuse box.

See GSMECOComfort for more details.

GSMFixiPlus is our bestselling control unit for installation in fuse box. With 2 inbuilt 16A relays, 2 ports for temperature sensors, inbuilt battery for power failure warnings and 1 alarm port this unit is all you need for a wide range of installations.

GSMAlarmControllerIII er flaggskipet innen styringsenheter beregnet for montasje i sikringskapet. Med 3 innebygde releer, 3 innganger for temperaturfølere, 4 innganger for kablet alarm og innebygd radio er den et sikkert valg for større installasjoner.​

Relé for innebygging i veggboks.

Bruker firkantet boks til CTM Lyng, festes til vegg (altså ikke skjult installasjon).

Foreslås av Terje at ventes med siden liten etterspørsel. Kan kanskje bestille 100 stk siden lite marked foreløpig.

Er altså ferdig for produksjon.

ECONodeWallSocket is a remote controlled plug with radio communication to and from our central units. Both outputs are controlled synchronously.

ECONodeWallSocket makes a neat and permanent installation easier without the use of wireless plugs such as ECO Node (el.nr: 64 311 24). The installation is simply much safer.

ECONodeWallSocket is equally suitable for open and hidded installations. Max load 16A/3600W. Everything that is connected to ECONodeWallSocket will be remote controlled so it is important not to connect electronic devices that you don't want to control remotely.

ECONodeWallSocket can be used as a switch (on/off) or as a thermostat (energy saving/comfort).

To use ECONodeWallSocket as a thermostat it needs to be connected to a temperature sensor. It is then possible to set an energy saving and a comfort temperature that you can switch between. It couldn't be easier.

ECONodeWallSocket needs to be registered in the central unit through a specific process described in the user manual.

ECORelay is installed in the fuse box and is a development of our earlier relays (EGR1 and EGR3)

ECORelay has 3 16 A / 3600 W potential free relays with associated port for cabled temperature sensors.

The relays can be used individually as on/off switches or thermostat. By connecting cabled temperature sensors it is possible to make a temperature reading and activate temperature monitoring to send alerts at low temperature.

You can also activate thermostat function individually on the relay with a connected temperature sensor and use them as thermostats - switch between energy saving and comfort temperature.

ECORelay also has 3 ports for cabled alarm equipment, plus a siren relay which is activated if the central unit is activated by fire or break-in.

The relay module communicates wirelessly with the central unit, so it is very easy to install.

ECORelay also has control buttons so that you can control each relay locally.

This compact device transforms a thermostat with signal input into a central or remotely controlled thermostat.

It is designed for hidden installation and delivers two control signals to the thermostat: 230 VAC and 230 VAC via a rectifier diode. This makes the thermostat completely flexible.

ECOThermostatPlug has been tested with:
Comforttemp 750 from VarmeComfort - Day (comfort), Night (energy saving) or frost protection.
Comforttemp 740 from VarmeComfort - Day (comfort), Night (energy saving) or Frost protection.
Multireg LCD2 from ThermoFloor - Day (comfort), Night (energy saving)
MTC2-1991-MH from MicroMatic - Day (comfort, Night (energy saving) or frost protection.

ECOThermostatPlug communicates wirelessly with the central unit so it is very easy to install. We recommend a wall box with a depth of 57 mm together with ECOThermostatPlug.

The thermostat can be remote controlled, with the option to change between normal, night mode and frost protection.

Please note that our thermostat products, such as ECOThermostatSI310Aand ECOThermostatSI316A has inbuilt remote control.

Sikom EGR1 is a slave relay for mounting on DIN rail in fuse box. EGR1 has 1 16A / 3600W relay which can be controlled remotely. It also has 1 port for temperature sensor which means that the relay can be used as a thermostat and change between energy saving and comfort temperature. With 2 ports for alarm in addition this is a very versatile product.

Sikom EGR1SireneNode is a slave relay for mounting on DIN rail in fuse box. EGR1SireneNode has 1 16A / 3600W relay which can be controlled remotely. It also has 1 port for temperature sensor which means that the relay can be used as a thermostat and change between energy saving and comfort temperature. With 2 ports for alarm in addition this is a very versatile product.

Sikom EGR3 is a slave relay for installation on DIN rail in fuse box. EGR3 has 3 16A / 3600W relays with associated ports for temperature sensors so that the relays can be used as thermostats.

GS33 is a slave relay with three potential free relays for installation together with the products GSMAlarmControllerIII or GSMFixiPlus. Makes it possible to extend with 3 circuits @ 16 ampere.

Digital thermostat or effect regulator with room, floor and limit sensor.
ComfortTemp750 is an electronic thermostat or effect regulator with inbuilt sensor, floor sensor and max / min limit in the floor sensor (NTC). The display has icons for easy operation.

MicrotempMTC2 is a digital thermostat for installation in standard wall box or directly on the wall with surface mounting box of type MTC-VH. MicrotempMTC2 is equipped with dual pole switch and has capacity for both energy saving and frost protection. The thermostats can control up to 3600W (16A) and have an LED which is lit when the heating is on. For larger loads MTC2 can control contactors.

Sikom WiredFireDetector is an optic smoke detector designed for cabling. Runs on 12V from Zentraleinheit and should be connected with at least 3 conductors. The smoke detector will of course also emit a local warning signal in addition to sending a warning to you.

TemperatureSensor8m is a temperature sensor with stripped cable ends ready for connection to connection block. Sensor and sensor cables should not be exposed to direct sunlight, the jacket around the cable is not UV resistant. The sensor can be shortened and lengthened.