Relé for innebygging i veggboks.

Bruker firkantet boks til CTM Lyng, festes til vegg (altså ikke skjult installasjon).

Foreslås av Terje at ventes med siden liten etterspørsel. Kan kanskje bestille 100 stk siden lite marked foreløpig.

Er altså ferdig for produksjon.

ECONodeWallSocket is a remote controlled plug with radio communication to and from our central units. Both outputs are controlled synchronously.

ECONodeWallSocket makes a neat and permanent installation easier without the use of wireless plugs such as ECO Node (el.nr: 64 311 24). The installation is simply much safer.

ECONodeWallSocket is equally suitable for open and hidded installations. Max load 16A/3600W. Everything that is connected to ECONodeWallSocket will be remote controlled so it is important not to connect electronic devices that you don't want to control remotely.

ECONodeWallSocket can be used as a switch (on/off) or as a thermostat (energy saving/comfort).

To use ECONodeWallSocket as a thermostat it needs to be connected to a temperature sensor. It is then possible to set an energy saving and a comfort temperature that you can switch between. It couldn't be easier.

ECONodeWallSocket needs to be registered in the central unit through a specific process described in the user manual.

ECORelay is installed in the fuse box and is a development of our earlier relays (EGR1 and EGR3)

ECORelay has 3 16 A / 3600 W potential free relays with associated port for cabled temperature sensors.

The relays can be used individually as on/off switches or thermostat. By connecting cabled temperature sensors it is possible to make a temperature reading and activate temperature monitoring to send alerts at low temperature.

You can also activate thermostat function individually on the relay with a connected temperature sensor and use them as thermostats - switch between energy saving and comfort temperature.

ECORelay also has 3 ports for cabled alarm equipment, plus a siren relay which is activated if the central unit is activated by fire or break-in.

The relay module communicates wirelessly with the central unit, so it is very easy to install.

ECORelay also has control buttons so that you can control each relay locally.

This compact device transforms a thermostat with signal input into a central or remotely controlled thermostat.

It is designed for hidden installation and delivers two control signals to the thermostat: 230 VAC and 230 VAC via a rectifier diode. This makes the thermostat completely flexible.

ECOThermostatPlug has been tested with:
Comforttemp 750 from VarmeComfort - Day (comfort), Night (energy saving) or frost protection.
Comforttemp 740 from VarmeComfort - Day (comfort), Night (energy saving) or Frost protection.
Multireg LCD2 from ThermoFloor - Day (comfort), Night (energy saving)
MTC2-1991-MH from MicroMatic - Day (comfort, Night (energy saving) or frost protection.

ECOThermostatPlug communicates wirelessly with the central unit so it is very easy to install. We recommend a wall box with a depth of 57 mm together with ECOThermostatPlug.

The thermostat can be remote controlled, with the option to change between normal, night mode and frost protection.

Please note that our thermostat products, such as ECOThermostatSI310Aand ECOThermostatSI316A has inbuilt remote control.