GSMECOComfort is a very versatile large capacity control unit. It can control up to 64 wireless devices and covers everything from wireless plugs for control of heaters, relays for installation in fuse boxes, wireless floor/room thermostats and a wide range of detectors.

GSMECOController is a very versatile control unit for smart houses and cabins.

This large capacity unit can control up to 64 wireless devices.

Otherwise same functionality as GSMECOComfort but with Modbus and RS485 in addition and intended for installation in the fuse box.

See GSMECOComfort for more details.

GSMFixiPlus is our bestselling control unit for installation in fuse box. With 2 inbuilt 16A relays, 2 ports for temperature sensors, inbuilt battery for power failure warnings and 1 alarm port this unit is all you need for a wide range of installations.

GSM12APlus is a control unit intended for 12V. With 2 inbuilt relays, 2 ports for temperature sensors, 2 ports for alarm detectors and low power consumption it is a very useful product for locations with no mains electricity. A bestseller for solar cell and 12V.

GSMAlarmControllerIII er flaggskipet innen styringsenheter beregnet for montasje i sikringskapet. Med 3 innebygde releer, 3 innganger for temperaturfølere, 4 innganger for kablet alarm og innebygd radio er den et sikkert valg for større installasjoner.​

GSMECOStarter is a very versatile large capacity control unit. It can control up to 64 wireless devices and covers everything from wireless plugs, relays in the fuse box, wireless floor/room thermostats and a wide range of detectors Local operation via a user friendly touch screen.

Sikom GSMMiniPlus is our Plug & Play solution for simple control purposes. GSMMiniPlus is used to remotely activate heating as well as controlling industrial appliances. The unit can control up to 8 wireless electrical outlets by radio, making it your simplest and most reliable option if you want to control appliances such as heaters.

Sikom GSMMiniPlusTypeJ is our Plug & Play solution for simple control purposes. GSMMiniPlusTypeJ is used to remotely activate heating as well as controlling industrial appliances. The unit can control up to 8 wireless electrical outlets by radio, making it your simplest and most reliable option if you want to control appliances such as heaters.

ECONodeWallSocket is a remote controlled plug with radio communication to and from our central units. Both outputs are controlled synchronously.

ECONodeWallSocket makes a neat and permanent installation easier without the use of wireless plugs such as ECO Node (el.nr: 64 311 24). The installation is simply much safer.

ECONodeWallSocket is equally suitable for open and hidded installations. Max load 16A/3600W. Everything that is connected to ECONodeWallSocket will be remote controlled so it is important not to connect electronic devices that you don't want to control remotely.

ECONodeWallSocket can be used as a switch (on/off) or as a thermostat (energy saving/comfort).

To use ECONodeWallSocket as a thermostat it needs to be connected to a temperature sensor. It is then possible to set an energy saving and a comfort temperature that you can switch between. It couldn't be easier.

ECONodeWallSocket needs to be registered in the central unit through a specific process described in the user manual.

ECORelay is installed in the fuse box and is a development of our earlier relays (EGR1 and EGR3)

ECORelay has 3 16 A / 3600 W potential free relays with associated port for cabled temperature sensors.

The relays can be used individually as on/off switches or thermostat. By connecting cabled temperature sensors it is possible to make a temperature reading and activate temperature monitoring to send alerts at low temperature.

You can also activate thermostat function individually on the relay with a connected temperature sensor and use them as thermostats - switch between energy saving and comfort temperature.

ECORelay also has 3 ports for cabled alarm equipment, plus a siren relay which is activated if the central unit is activated by fire or break-in.

The relay module communicates wirelessly with the central unit, so it is very easy to install.

ECORelay also has control buttons so that you can control each relay locally.