GSMFixiPlus is our bestselling control unit for installation in fuse box. With 2 inbuilt 16A relays, 2 ports for temperature sensors, inbuilt battery for power failure warnings and 1 alarm port this unit is all you need for a wide range of installations.

GSMAlarmControllerIII er flaggskipet innen styringsenheter beregnet for montasje i sikringskapet. Med 3 innebygde releer, 3 innganger for temperaturfølere, 4 innganger for kablet alarm og innebygd radio er den et sikkert valg for større installasjoner.​

ECO Dimplex Receiver lets you easily switch between an economy temperature (Eco) and a normal temperature (Comfort). Temperatures are adjustable. The minimum set temperature is 7 degrees C, the maximum set temperature is 30 degrees C.

ECOGlamoxPlug is a plug-in module for heaters in the 3001 series from Glamox Heating.

ECOGlamoxPlug is connected directly to the heater and provides the option to centrally and remotely control heaters via our apps.

You decide the energy saving and the comfort temperature for the heater. Minimum energy saving temperature is 5 degrees Celsius and maximum comfort temperature is 40 degrees Celsius.

Our apps make it easy to switch between energy saving and comfort temperature or to set up a Wochenschaltuhr.

ECOGlamoxPlug transmits the temperature measured on the back of the heater so that you can see the temperature in our app.

ECOGlamoxPlug makes it easier than ever to control heaters from your mobile phone.

Compatible with Glamox heaters of type 3001.

This compact device transforms a thermostat with signal input into a central or remotely controlled thermostat.

It is designed for hidden installation and delivers two control signals to the thermostat: 230 VAC and 230 VAC via a rectifier diode. This makes the thermostat completely flexible.

ECOThermostatPlug has been tested with:
Comforttemp 750 from VarmeComfort - Day (comfort), Night (energy saving) or frost protection.
Comforttemp 740 from VarmeComfort - Day (comfort), Night (energy saving) or Frost protection.
Multireg LCD2 from ThermoFloor - Day (comfort), Night (energy saving)
MTC2-1991-MH from MicroMatic - Day (comfort, Night (energy saving) or frost protection.

ECOThermostatPlug communicates wirelessly with the central unit so it is very easy to install. We recommend a wall box with a depth of 57 mm together with ECOThermostatPlug.

The thermostat can be remote controlled, with the option to change between normal, night mode and frost protection.

Please note that our thermostat products, such as ECOThermostatSI310Aand ECOThermostatSI316A has inbuilt remote control.

Together with Glen Dimplex Nordic we have developed receiver plugs for control of Siemens Unique and Classic, Dimplex Topaz and potentially Clima Extend by using Sikom central units with wireless radio control.

Unit for reading data from AMS smart meter. Mounted on DIN rail in fuse box. Connects to HAN interface on AMS smart meter using a cable.The ECO Energy Controller must be connected wirelessly to a Sikom ECO gateway. Available features will be accessable in the Sikom Living app.