ECO Dimplex Receiver lets you easily switch between an economy temperature (Eco) and a normal temperature (Comfort). Temperatures are adjustable. The minimum set temperature is 7 degrees C, the maximum set temperature is 30 degrees C.

ECOGlamoxPlug is a plug-in module for heaters in the 3001 series from Glamox Heating.

ECOGlamoxPlug is connected directly to the heater and provides the option to centrally and remotely control heaters via our apps.

You decide the energy saving and the comfort temperature for the heater. Minimum energy saving temperature is 5 degrees Celsius and maximum comfort temperature is 40 degrees Celsius.

Our apps make it easy to switch between energy saving and comfort temperature or to set up a Wochenschaltuhr.

ECOGlamoxPlug transmits the temperature measured on the back of the heater so that you can see the temperature in our app.

ECOGlamoxPlug makes it easier than ever to control heaters from your mobile phone.

Compatible with Glamox heaters of type 3001.

ECOBEHAPlug is our new plug-in module for the Norwegian heater manufacturer Beha.

ECOBEHAPlug is particularly suitable for a house or cottage where you want to be able to turn the heater off completely when you are not there (energy saving function "OFF").

ECOBEHAPlug is connected directly to the heater and gives you the option to control the heater centrally or remotely between either:

1) Comfort temperature, the temperature is set on the thermostat wheel on the heater

or

2) Energy saving function. There are three energy saving settings: night temperature, frost function or off (heather completely turned off).

The default setting is night temperature. You can choose energy saving setting in the app.

Explanation of the three energy saving features:

Night temperature - the temperature is lowered 4-5 below the temperature that the thermostat wheel on the heater is set to.

Frost function - the temperature is lowered to around 5-7 degrees.

Off - the heater is turned off completely and will not turn on until the systemet is set to comfort temperature again.

The temperature in the room is not accesible via ECOBEHAPlug. For temperature reading, we recommend a product such as ECOTemperatureSensor10K47K or WirelessTemperatureDetector.

​All control is based on the temperature wheel on the heater. ECOBEHAPlug is compatible with all BEHA heaters of type P and L produced from August 2005.

This compact device transforms a thermostat with signal input into a central or remotely controlled thermostat.

It is designed for hidden installation and delivers two control signals to the thermostat: 230 VAC and 230 VAC via a rectifier diode. This makes the thermostat completely flexible.

ECOThermostatPlug has been tested with:
Comforttemp 750 from VarmeComfort - Day (comfort), Night (energy saving) or frost protection.
Comforttemp 740 from VarmeComfort - Day (comfort), Night (energy saving) or Frost protection.
Multireg LCD2 from ThermoFloor - Day (comfort), Night (energy saving)
MTC2-1991-MH from MicroMatic - Day (comfort, Night (energy saving) or frost protection.

ECOThermostatPlug communicates wirelessly with the central unit so it is very easy to install. We recommend a wall box with a depth of 57 mm together with ECOThermostatPlug.

The thermostat can be remote controlled, with the option to change between normal, night mode and frost protection.

Please note that our thermostat products, such as ECOThermostatSI310Aand ECOThermostatSI316A has inbuilt remote control.

Together with Glen Dimplex Nordic we have developed receiver plugs for control of Siemens Unique and Classic, Dimplex Topaz and potentially Clima Extend by using Sikom central units with wireless radio control.