ECONodeWallSocket is a remote controlled plug with radio communication to and from our central units. Both outputs are controlled synchronously.

ECONodeWallSocket makes a neat and permanent installation easier without the use of wireless plugs such as ECO Node (el.nr: 64 311 24). The installation is simply much safer.

ECONodeWallSocket is equally suitable for open and hidded installations. Max load 16A/3600W. Everything that is connected to ECONodeWallSocket will be remote controlled so it is important not to connect electronic devices that you don't want to control remotely.

ECONodeWallSocket can be used as a switch (on/off) or as a thermostat (energy saving/comfort).

To use ECONodeWallSocket as a thermostat it needs to be connected to a temperature sensor. It is then possible to set an energy saving and a comfort temperature that you can switch between. It couldn't be easier.

ECONodeWallSocket needs to be registered in the central unit through a specific process described in the user manual.

ECORelay is installed in the fuse box and is a development of our earlier relays (EGR1 and EGR3)

ECORelay has 3 16 A / 3600 W potential free relays with associated port for cabled temperature sensors.

The relays can be used individually as on/off switches or thermostat. By connecting cabled temperature sensors it is possible to make a temperature reading and activate temperature monitoring to send alerts at low temperature.

You can also activate thermostat function individually on the relay with a connected temperature sensor and use them as thermostats - switch between energy saving and comfort temperature.

ECORelay also has 3 ports for cabled alarm equipment, plus a siren relay which is activated if the central unit is activated by fire or break-in.

The relay module communicates wirelessly with the central unit, so it is very easy to install.

ECORelay also has control buttons so that you can control each relay locally.