GSM 12A er en 12 volts enhet som kan styre 2 strømkurser. Den har 2 temperaturinnganger og 2 alarm innganger.
GSM 12A har innebygget radio for aktivering og deaktivering av alarm ved hjelp av WirelessKeyboard
Passendes Zubehör zu GSM12A
ECONode is a Plug&Play wireless plug for use with several of our central units. It has an inbuilt 16A / 3600W relay and is suitable for remote control or heaters and other electronic products which are plugged into a wall socket.
ECORelay is installed in the fuse box and is a development of our earlier relays (EGR1
ECORelay has 3 16 A / 3600 W potential free relays with associated port for cabled temperature sensors.
The relays can be used individually as on/off switches or thermostat. By connecting cabled temperature sensors it is possible to make a temperature reading and activate temperature monitoring to send alerts at low temperature.
You can also activate thermostat function individually on the relay with a connected temperature sensor and use them as thermostats - switch between energy saving and comfort temperature.
ECORelay also has 3 ports for cabled alarm equipment, plus a siren relay which is activated if the central unit is activated by fire or break-in.
The relay module communicates wirelessly with the central unit, so it is very easy to install.
ECORelay also has control buttons so that you can control each relay locally.
Sikom EGR1 is a slave relay for mounting on DIN rail in fuse box. EGR1 has 1 16A / 3600W relay which can be controlled remotely. It also has 1 port for temperature sensor which means that the relay can be used as a thermostat and change between energy saving and comfort temperature. With 2 ports for alarm in addition this is a very versatile product.
Together with Glen Dimplex Nordic we have developed receiver plugs for control of Siemens Unique and Classic, Dimplex Topaz and potentially Clima Extend by using Sikom central units with wireless radio control.
ECOSireneNode is a Plug&Play wireless plug for use with several of our central units. It has an inbuilt 16A / 3600W relay and is suitable for remote control or heaters and other electronic products which are plugged into a wall socket.
Sikom WiredFireDetector is an optic smoke detector designed for cabling. Runs on 12V from Zentraleinheit
and should be connected with at least 3 conductors. The smoke detector will of course also emit a local warning signal in addition to sending a warning to you.
Sikom WiredMagnetDetector makes it easy to monitor exposed doors and windows. When the magnetic field between the two parts is interrupted the alarm is activated. You need a dual conductor from Zentraleinheit
to the magnetic connector.
Sikom WiredPIRDetector is designed for cabling. Runs on 12V from Zentraleinheit
and should be connected with at least 3 conductors. The motion sensor can sound a local alarm when using ECOSireneNode
and can of course also send you a warning.
Sikom WiredWaterDetector is a water detector designed for cabling. Runs on 12V from Zentraleinheit
and should be connected with at least 3 conductors. The water detector warns if there is contact between the poles on the bottom of the detector.
Sikom WirelessFireDetector is an optic smoke detector with wireless connection to Zentraleinheit
. This makes it very easy to install, because no cables are required.
Runs either on mains electricity or 9V battery.
The smoke detector will of course have a local alarm as well as sending a warning to you.
If one detector is set off all other detectors will also be activated.
TemperatureSensor8m is a temperature sensor with stripped cable ends ready for connection to connection block. Sensor and sensor cables should not be exposed to direct sunlight, the jacket around the cable is not UV resistant. The sensor can be shortened and lengthened.