WiredFireDetector
Sikom WiredFireDetector is an optic smoke detector designed for cabling. Runs on 12V from Zentraleinheit and should be connected with at least 3 conductors. The smoke detector will of course also emit a local warning signal in addition to sending a warning to you.
Installationsanleitung Produktblatt |
 NOK 450.00 |
Beschreibung
The detector can be daisy-chained and at least 3 conductors should be used in the cable. This detector has inbuilt resistance so that Sikom products are able to identify which type of detector is connected.
NB: Ikke monter optiske røykvarslere og signal kabler i nærheten av spot-lys, transformatorer, lysstoffrør, strømkabler eller annet utstyr som sender ut elektromagnetisk støy.
WiredFireDetector passt zu:
GSM12APlus
GSMAlarmControllerIII
EGR1
NB: Ikke monter optiske røykvarslere og signal kabler i nærheten av spot-lys, transformatorer, lysstoffrør, strømkabler eller annet utstyr som sender ut elektromagnetisk støy.
WiredFireDetector passt zu:
GSM12APlus
GSMAlarmControllerIII
EGR1
WiredFireDetector passt zu
Zentraleinheit
GSM12APlus is a control unit intended for 12V. With 2 inbuilt relays, 2 ports for temperature sensors, 2 ports for alarm detectors and low power consumption it is a very useful product for locations with no mains electricity. A bestseller for solar cell and 12V.
GSMAlarmControllerIII er flaggskipet innen styringsenheter beregnet for montasje i sikringskapet. Med 3 innebygde releer, 3 innganger for temperaturfølere, 4 innganger for kablet alarm og innebygd radio er den et sikkert valg for større installasjoner.
Stromversorgung
Sikom EGR1 is a slave relay for mounting on DIN rail in fuse box. EGR1 has 1 16A / 3600W relay which can be controlled remotely. It also has 1 port for temperature sensor which means that the relay can be used as a thermostat and change between energy saving and comfort temperature. With 2 ports for alarm in addition this is a very versatile product.