GSMFixiPlus is our bestselling control unit for installation in fuse box. With 2 inbuilt 16A relays, 2 ports for temperature sensors, inbuilt battery for power failure warnings and 1 alarm port this unit is all you need for a wide range of installations.
GSMAlarmControllerIII er flaggskipet innen styringsenheter beregnet for montasje i sikringskapet. Med 3 innebygde releer, 3 innganger for temperaturfølere, 4 innganger for kablet alarm og innebygd radio er den et sikkert valg for større installasjoner.
Remote control of Nobø and Dimplex panel heaters
Remote control of Glamox panel heaters
Relé for innebygging i veggboks.
Bruker firkantet boks til CTM Lyng, festes til vegg (altså ikke skjult installasjon).
Foreslås av Terje at ventes med siden liten etterspørsel. Kan kanskje bestille 100 stk siden lite marked foreløpig.
Er altså ferdig for produksjon.
Sikom EGR1 is a slave relay for mounting on DIN rail in fuse box. EGR1 has 1 16A / 3600W relay which can be controlled remotely. It also has 1 port for temperature sensor which means that the relay can be used as a thermostat and change between energy saving and comfort temperature. With 2 ports for alarm in addition this is a very versatile product.
Sikom EGR1SireneNode is a slave relay for mounting on DIN rail in fuse box. EGR1SireneNode has 1 16A / 3600W relay which can be controlled remotely. It also has 1 port for temperature sensor which means that the relay can be used as a thermostat and change between energy saving and comfort temperature. With 2 ports for alarm in addition this is a very versatile product.
Sikom EGR3 is a slave relay for installation on DIN rail in fuse box. EGR3 has 3 16A / 3600W relays with associated ports for temperature sensors so that the relays can be used as thermostats.
GS33 is a slave relay with three potential free relays for installation together with the products GSMAlarmControllerIII
. Makes it possible to extend with 3 circuits @ 16 ampere.
Digital thermostat or effect regulator with room, floor and limit sensor.
ComfortTemp750 is an electronic thermostat or effect regulator with inbuilt sensor, floor sensor and max / min limit in the floor sensor (NTC). The display has icons for easy operation.
MicrotempMTC2 is a digital thermostat for installation in standard wall box or directly on the wall with surface mounting box of type MTC-VH. MicrotempMTC2 is equipped with dual pole switch and has capacity for both energy saving and frost protection. The thermostats can control up to 3600W (16A) and have an LED which is lit when the heating is on. For larger loads MTC2 can control contactors.